Unlike the products mentioned above, the Cafco Fendolite MII is a spray that provides fireproof coating. One of Berger’s finest products, this spray-applied High Density Cementitious Vermiculite Fireproof Coating provides structural steel protection from hydrocarbon and cellulosic fire for upto 240 mins and in accordance with UL 1709 design number XR 719.

Berger’s Promaspray P400 is a versatile fireproofing coating: it is suitable for internal as well external use.

This Low Density Vermiculite based fireproof product is the ideal coating for load bearing structural beams, columns and hollow sections for cellulosic fire protection upto 240 minutes in accordance with ASTM E119.

Berger's Guideline Cycle Track Paint is a heavy-duty, 2K water-based Acrylic- Epoxy Hybrid coating system. This is designed for ambient cure and is the most suitable water-based Thermoset coating for external application on concrete exposed to UV effect.

The Promaspray P300 is a Lightweight fireproofing material which is best suited for internal use. This fireproof coating is used to protect load bearing structural beams, columns and hollow sections. This factory-mixed Cementitious Gypsum Based Vermiculite Coating can protect structures from cellulosic fire for upto 240 minutes. 

This deck coating from Berger is a multilayer, multi-polymer coating product that includes a primer and a top coat for seamless anti-skid coatings in a wide range of shades. The Pro Epishield Deck Coating is used to protect concrete bridge cracks and prevent water infiltration, making it ideal for parking decks, drive aisles, turn lanes, and access ramps.

Guideline Airfield WBR Paint is a single component, fast drying water-based cold applied retro reflective airfield marking paint formulated with high volume solid Acrylic Emulsion, microfine Pigments, Extenders and unique Additives that make it anti-fungal, anti-foaming, anti-fading etc.

Self levelling high performance clear glossy top coat based on epoxy-novolac resin for use as a top coat for chemical plants floor protection. It has good abrasion, scratch and impact resistance along with good chemical resistance and ideally suited for concentrated sulfuric acid spillage areas.

• Good chemical resistance   
• Good abrasion, scratch and impact resistance
• Suitable for concentrated sulfuric acid spillage areas

Berger's solvent-free self-levelling epoxy screed is ideal for covering up imperfections and unevenness on concrete substrates. The Pro Epishield floor SL screed provides the correct treatment for applying a self-levelling top coat. It gets sandwiched between the floor coating primer and the final top coat finish, giving the overall coating a high compressive strength and abrasive resistance. Not all surfaces require the SL screed coatings, but it is highly recommended when the floor is subjected to high load-bearing movement. The recommended coating thickness is 1mm - 3mm.

Seamless, self levelling, high voltage insulation coating based on epoxy resin reinforced with special type of fine aggregates and is available in assorted shades for application on concrete floor.

• High voltage insulation coating
• High Abrasion Resistance  
• High Protection against corrosion, provides a dust free, clean and durable floor coating.

Guideline RM 164 Paint is a 100% acrylic, water-based road marking IS 164 Grade paint. It provides excellent wear and tear resistance therefore enhancing road safety. With a drying time of only 1 hour, it is suitable on bituminous and concrete surfaces such as curbs, medians, airfield markings, etc.